Product Overview
Experience next-generation wireless performance with the WiFi 6E AX3000 PCIe Network Card, designed for ultra-fast connectivity, low latency, and seamless Bluetooth integration.
- WiFi 6E AX3000 Speeds – Up to 5374Mbps across 2.4GHz, 5GHz, and 6GHz bands
- Bluetooth 5.2 – Backward compatible with v5.1/5.0/4.2/4.0
- 802.11AXE Tri-Band – Enhanced flexibility and congestion-free performance
- MU-MIMO + OFDMA – Multi-device streaming with ultra-low latency
- MediaTek MTK7922 Chipset – High-efficiency wireless engine
- Integrated Heat Sink – Maintains optimal temperatures during peak usage
- OS Support – Windows 11 & 10 (64-bit only)
Perfect for gamers, streamers, and power users seeking high-speed wireless and Bluetooth performance in a desktop environment.
Important Notice
⚠️ Speed Disclaimer: To achieve the advertised speeds of up to 5374Mbps, your router must support WiFi 6E and your internet service plan must provide sufficient bandwidth. Performance may vary based on router capabilities, signal interference, and network environment.
What You’ll Find Inside
- WiFi 6E AX3000 PCIe Network Card
- Bluetooth header cable
- External antennas
- Driver CD & QR code manual
- Anti-static packaging
Installation Instructions
- Install the card into a PCIe x1 or higher slot
- Connect the Bluetooth cable to your motherboard’s 9-pin F_USB header
- Install drivers via CD or from here
- Reboot your system after installation
- Position antennas for optimal signal reception
Precautions Before Installation
- Power Down the System – Unplug your PC before installation
- Discharge Static Electricity – Use an anti-static wrist strap or touch grounded metal
- Verify Slot Compatibility – Ensure your motherboard has an available PCIe slot
- Backup Important Data – Save critical files before hardware changes
Precautions During Installation
- Handle with Care – Avoid touching electronic components
- Secure Properly – Ensure the card is seated firmly in the PCIe slot
- Connect the Bluetooth Cable – Required for Bluetooth functionality
- Reassemble the System – Close the case securely before powering on
Precautions Post-Installation
- Install Drivers – Use the CD or QR code to install WiFi and Bluetooth drivers
- Verify Connectivity – Confirm WiFi and Bluetooth are active in Windows
- Test Speed and Stability – Use benchmarking tools to validate performance
- Monitor for Issues – Update drivers and firmware as needed
Improving Wi‑Fi Signal (Access Point & Wi‑Fi Card)
- Place your Wi‑Fi access point in a central, open area for even coverage
- Elevate the access point to 4–6 feet high and keep it away from metal objects or appliances
- Use the 5 GHz band and set channel width to 40 MHz for best stability in apartment buildings
- Select a clear 5 GHz channel such as 149, 153, 157, or 161 to reduce interference
- Position the PCIe card’s antennas for optimal reception
- Keep antennas vertical for maximum horizontal coverage
- If your card has three antennas, angle the center antenna slightly outward for improved signal balance
- Use the included external antenna base (if provided) and place it on your desk with a clear line of sight to the access point
- Update to the latest Wi‑Fi 6/6E drivers for improved performance and stability
- Enable 802.11ax (Wi‑Fi 6/6E) mode in Device Manager and set the preferred band to 5 GHz
- Avoid placing the PC or access point near microwaves, fridges, mirrors, or concrete walls
- For Wi‑Fi 6E, keep the access point and PC in the same room due to shorter 6 GHz range
Troubleshooting Guide
- Bluetooth not working? Check the 9-pin cable connection
- WiFi signal weak? Reposition antennas and reduce interference
- Driver issues? Reinstall and reboot
- Card not detected? Try a different PCIe slot and check BIOS settings
FAQ
1. What is WiFi 6E?
WiFi 6E extends WiFi 6 into the 6GHz band, offering faster speeds, lower latency, and less congestion.
2. Is this card compatible with older routers?
Yes, it supports 2.4GHz and 5GHz bands for backward compatibility with WiFi 5 and earlier routers.
3. How do I enable Bluetooth?
Connect the included cable to your motherboard’s 9-pin F_USB header and
Support
For additional assistance, contact us at: support@digitaldevices.ca
📧 Email Support
🔙 Back to Support
